Hellcat Anti-Theft Devices

[drag racer]

sub'd

 

[DavidKFla]

I can.

It is open source, with a few unique parts.



Sent from my SM-G955U using Tapatalk

Where does it get installed?

 

[Diboblo]

Where does it get installed?

PM on the way.

Sent from my SM-G955U using Tapatalk

 

[GBLWRMR]

I just don't like the idea of anyone chopping into 14 circuits on my car. If every one is not a soldered connection and shrink wrapped it's 14 more possible problems down the road.

The Revelco only interrupts two circuits. Not 14.

 

[Paladin06]

This is what I use even in the garage
https://www.autozone.com/alarm-and-...ginal-steering-wheel-security-lock/500207_0_0

Old school for sure.

 

[Trucker Bob]

Old school for sure.

Why phuck with your elec. system you can't move it if you can't steer it, crank the wheels to one side and you can't even pull her up on to a flat bed. Plus when it's seen it's a deterrent.
TB

 

[Diboblo]

Why phuck with your elec. system you can't move it if you can't steer it, crank the wheels to one side and you can't even pull her up on to a flat bed. Plus when it's seen it's a deterrent.
TB

Done properly, there are zero issues, interrupting the various ignition circuits, on these cars.

...done properly.

Solder and waterproof heat shrink, are your friends.

I've been modifying this platform, for over 10 years. This discussion is tame, compared to some of the mods I've done.

Just be careful and take tour time, doing any electrical mods... and ask plenty of questions.

I'm here to help.

Sent from my SM-G955U using Tapatalk